Clutch and steering are two mechanical systems that the driver controls. One has that said custom to be damaged more quickly than the other: it is the clutch system of course. With in particular the gearbox, in close connection. It happens quite regularly that gearshift problems occur on the + str (XXX) +. And even if the clutch is regularly involved, it sometimes happens that we have surprises about the cause of the problems. Also, it sometimes avoids replacing the entire kit. So here are the gear change issues the most usual.speed-pass-more-Lancia-2000

+ str (XXX) +: Impossible to pass one of the speeds

It happens regularly that one of the gears no longer works. Or just even or odd speeds. In this situation, the clutch is in bad condition. However, it is not inevitably linked to the whole clutch kit or gearbox of your + str (XXX) +. The problem may be with a connecting rod or rubber that holds it in place. The problem can also arise from the gearbox. You can remove it to check that no external component is blocking it. If it is damaged, it must be changed.

Unable to change gear once the + str (XXX) + engine is started

Unfortunately, this is a rather frequent problem. Since the engine block is off, it is possible to change your gears, this implies that the gearbox of your + str (XXX) + is operational. Once the engine block is running, it is impossible. The problem is with the clutch. Often it will be advisable to change the entire clutch kit. You can always take it apart and check the condition of all the parts. For information, it is advisable to change the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears pass, the engine off as on, it's really unpleasant. The first thing to check is the wear of the gearbox of your + str (XXX) +. There is a good chance that it will be out of service. In order to discern where the problem comes from it is relatively simple. If you can put the lever in the guide of a gear, but the gear does not engage, the clutch is probably the problem. If the lever seems stuck and you can't push it, the problem is most likely with the gearbox. For one like the other, it is very likely necessary to change one or more parts.