The clutch and the steering are the two mechanical devices that the motorist steers. One nevertheless has the habit of deteriorating faster than the other: it is the clutch device of course. Obviously with the gearbox, in close connection. Rather regularly, gearshift malfunctions occur on this + str (XXX) +. And even if the clutch is often the cause, it sometimes happens that we have surprises about the source of the malfunctions. In addition, it avoids at times having to change the whole kit. So here are the gearshift malfunctions the most regular.speed-pass-more-Lancia-Beta

+ str (XXX) +: Impossible to pass one of the speeds

Sometimes one of the gears no longer shifts. Or just even or odd speeds. In this situation, the clutch is damaged. But it is not necessarily due to the entire clutch kit or gearbox of your + str (XXX) +. The problem may come from a link or a rubber that holds it. The problem can also come from the gearbox. You can disassemble it to check that no foreign component is blocking it. If the latter is damaged, you must replace it.

Unable to shift gear once the + str (XXX) + engine is running

Unfortunately, this is a fairly common problem. Since the engine block is off, it is still possible to shift your gears, this means that the gearbox of your + str (XXX) + is operational. Once the engine block has started, it is impossible. The problem must come from the clutch. Usually it will be advisable to replace the entire clutch kit. You can try to remove it and look at the condition of all the parts. As a reminder, it is still advisable to replace the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears are working, the engine stopped or running, it's really annoying. The first thing to look at is the wear and tear on the gearbox of your + str (XXX) +. There is a high probability that the latter will be HS. To understand where the problem comes from it's quite simple. If you can put the lever in the guide of one of the speeds, but the speed does not take, it is the clutch which probably has a problem. If the lever seems to be blocked and you cannot push it, the problem probably comes from the gearbox. For both, you most likely need to replace one or more parts.