Clutch and steering are two mechanical systems that the motorist controls. One said that the habit of getting damaged faster than the other: it is the clutch device of course. Obviously with the gearbox, in close connection. It happens relatively regularly that gearshift malfunctions occur on this + str (XXX) +. And even if the clutch is frequently involved, it sometimes happens that we are surprised at the source of the malfunctions. In addition, it sometimes avoids changing the complete kit. Here are consequently the gearshift malfunctions The most common.speed-pass-more-Lancia-Voyager

+ str (XXX) +: Impossible to pass one of the speeds

Sometimes one of the gears no longer shifts. Or only even or odd speeds. In this situation, the clutch is in poor condition. However, this is not necessarily linked to the entire clutch kit or gearbox of your + str (XXX) +. The malfunction may be caused by a link or a rubber that holds it. The malfunction can also happen from the gearbox. You can disassemble it to check that nothing outside is blocking it. If it is defective, you must change it.

Unable to shift gear once the + str (XXX) + engine is running

It is unfortunately a rather frequent dysfunction. Since the engine block is off it is possible to shift your gears, this means that the gearbox of the + str (XXX) + is operational. Once the engine block is on, it is impossible. The malfunction must come from the clutch. Usually it will be essential to change the complete clutch kit. You can always dismantle it and check the condition of each of the components. For information, it is advisable to change the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears work, the engine off or in working order, it's really annoying. One thing to check is the wear and tear on the gearbox of your + str (XXX) +. There is a good chance that it will be out of service. In order to understand where the malfunction comes from it's relatively easy. If you can put the lever in the guide of one of the speeds, but it does not take, it is the clutch which probably presents a malfunction. If the lever seems to be blocked and you cannot push it, the malfunction probably comes from the gearbox. For both, you most certainly need to change one or more rooms.