The clutch and the steering are two mechanical devices that the motorist directs. One, however, is used to wear out faster than the other: it is the clutch system naturally. Obviously with the gearbox, which goes with it. Rather frequently, gearshift malfunctions occur on this + str (XXX) +. And even if the clutch is frequently involved, it sometimes happens that we are surprised at the reason for the malfunctions. In addition, this occasionally prevents the complete kit from being changed. These are the gearshift malfunctions the most regular.speed-pass-more-Lancia-Y10

+ str (XXX) +: Impossible to pass one of the speeds

Sometimes one of the gears does not pass any more. Or only even or odd speeds. In this case, the clutch is damaged. However, this is not necessarily linked to the whole of the clutch kit or gearbox of your + str (XXX) +. It may be that the problem comes from a link or a rubber that holds it. The problem can also arise from the gearbox. It can be placed to verify that no foreign element is blocking it. If it is defective, it will have to be changed.

Unable to shift gear once the + str (XXX) + engine is running

Unfortunately, this is a fairly common concern. Since the engine block is off it is possible to shift your gears, this means that the gearbox of the + str (XXX) + is operational. Once the engine block is running, it is impossible. The concern must come from the clutch. Often it will be essential to replace the complete clutch kit. You can always disassemble it and look at the state of each of the components. As a reminder, it is recommended to replace the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears work, the engine off or in working order, it's really annoying. One thing to look at is the condition of the gearbox of your + str (XXX) +. There may be a high probability that it will be out of service. In order to discern where the problem comes from, it's relatively simple. If you can push the lever into the guide of one of the speeds, but the speed does not take, the clutch is probably the problem. If the lever seems to be blocked and you cannot push it, the problem certainly comes from the gearbox. For both, it will most certainly have to replace one or more parts.