The clutch and steering are the two mechanical devices that the driver controls. One, however, tends to wear out faster than the other: it is the clutch system naturally. Obviously with the gearbox, in close connection. Relatively regularly, gearshift problems occur on the + str (XXX) +. And even if the clutch is regularly involved, it sometimes happens that we have surprises about the cause of the problems. Also, this sometimes avoids replacing the entire kit. These are the gear change issues the most usual.speed-pass-more-Lancia-Ypsilon-3

+ str (XXX) +: Impossible to pass one of the speeds

It often happens that one of the gears no longer shifts. Or only even or odd speeds. As a result, the clutch is in poor condition. But this is not necessarily linked to the whole clutch kit or gearbox of your + str (XXX) +. Sometimes the malfunction comes from a link or a rubber that holds it. The malfunction can still come from the gearbox. You can disassemble it to check that nothing outside is blocking it. If the latter is damaged, it must be changed.

Unable to change gear once the + str (XXX) + engine is started

It is unfortunately a fairly recurrent dysfunction. Since the engine is off it is possible to shift your gears, this implies that the gearbox of the + str (XXX) + is operational. Once the engine is started, it is impossible. The malfunction comes from the clutch. In general it will be advisable to change the entire clutch kit. You can try to disassemble it and look at the condition of all the parts. As a reminder, it is recommended to change the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears pass, the engine off as on, it's really annoying. The first thing to look at is the wear and tear on the gearbox of your + str (XXX) +. There may be great chances that it will be HS. In order to understand where the malfunction comes from it's pretty simple. If you can put the lever in the guide of one of the gears, but it does not take, it is the clutch which probably has a malfunction. If the lever appears to be blocked and you cannot push it, the malfunction probably comes from the gearbox. For both, it is most certainly necessary to change one or more rooms.