The clutch and steering are two mechanical devices that the driver controls. One has said that it wears out faster than the other: it's the clutch, of course. With of course the gearbox, which is closely linked. Relatively frequently, gearshift problems occur on the + str (XXX) +. And even if the clutch is regularly involved, it sometimes happens that we are surprised at the source of the problems. In addition, it sometimes avoids replacing the entire kit. Here are consequently the gear change issues The most common.speed-pass-more-Lancia-Zeta

+ str (XXX) +: Impossible to pass one of the speeds

Sometimes one of the gears does not pass any more. Or only even or odd speeds. In this situation, the clutch is in poor condition. But that is not necessarily due to the whole clutch kit or gearbox of your + str (XXX) +. It happens that the marigold comes from a link or from a rubber which holds it. The problem can also come from the gearbox. It can be removed to check that nothing outside is blocking it. If the latter is damaged, it must be changed.

Unable to shift gear once the + str (XXX) + engine is running

Unfortunately, this is a rather recurring concern. Since the engine is off it is possible to shift your gears, this implies that the gearbox of the + str (XXX) + is operational. Once the engine is running, it is impossible. The problem stems from the clutch. Often it will be advisable to replace the entire clutch kit. You can try to deposit it and check the condition of each of the parts. For information, it is recommended to replace the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears are working, the engine off as on, it's really unpleasant. One thing to check is the wear and tear on the gearbox of your + str (XXX) +. There may be a high probability that the latter is HS. To discern where the problem originated, it's quite easy. If you can push the lever in the guide of a speed, but that one does not engage, it is the clutch which probably holds a concern. If the lever seems to be stuck and you cannot push it, the problem probably comes from the gearbox. For both, it is most certainly necessary to replace one or more parts.