Clutch and steering are two mechanical systems that the driver controls. One, however, tends to get damaged faster than the other: it is the clutch mechanism of course. Obviously with the gearbox, which goes with it. Relatively regularly, gearshift malfunctions occur on the + str (XXX) +. And even if the clutch is regularly involved, it sometimes happens that we are surprised at the reason for the malfunctions. In addition, it saves from time to time replacing the complete kit. Here are consequently the gearshift malfunctions The most common.
+ str (XXX) +: Impossible to pass one of the speeds
It happens from time to time that one of the gears does not pass any more. Or only even or odd speeds. As a result, the clutch is damaged. However, this is not necessarily due to the entire clutch kit or gearbox of your + str (XXX) +. It is possible that the problem comes from a link or a rubber that holds it. The problem can also arise from the gearbox. It is possible to deposit it in order to check that no foreign element is blocking it. If it is damaged, you must change it.
Unable to shift gear once the + str (XXX) + engine is running
Unfortunately, this is a fairly recurring concern. Since the engine is off it is possible to shift your gears, this means that the gearbox of the + str (XXX) + is in good condition. Once the engine is started, it is impossible. The concern comes from the clutch. In general it will be advisable to replace the complete clutch kit. You can try to remove it and check the condition of all the parts. For information, it is recommended to replace the clutch every 150 km.
+ str (XXX) +: no speed passes
If none of the gears work, the engine stopped as lit, it's really unpleasant. One thing to check is the wear and tear on the gearbox of your + str (XXX) +. There is a high probability that the latter will be HS. To discern where the concern comes from, it's relatively easy. If you can push the lever into the guide of a speed, but it does not take, it is the clutch that probably presents a problem. If the lever seems to be blocked and you cannot push it, the problem probably comes from the gearbox. In either case, you will most likely need to replace one or more parts.