Clutch and steering are two mechanical systems that the motorist controls. One, however, is used to damaging faster than the other: it is the clutch system of course. With of course the gearbox, which is closely linked. Relatively frequently, gearshift malfunctions occur on the + str (XXX) +. And even if the clutch is frequently involved, it happens that we have surprises about the source of the malfunctions. In addition, this occasionally avoids replacing the entire kit. So here are the gearshift malfunctions the most common.speed-pass-more-Seat-Arona

+ str (XXX) +: Impossible to pass one of the speeds

Sometimes one of the gears does not pass any more. Or only even or odd speeds. In this case, the clutch is damaged. However, this is not inevitably linked to the whole of the clutch kit or gearbox of your + str (XXX) +. It is possible that the problem stems from a link or a rubber that holds it. The problem can still happen from the gearbox. It is possible to dismantle it to check that no external element is blocking it. If it is damaged, you must replace it.

Unable to shift gear once the + str (XXX) + engine is running

Unfortunately, this is a fairly common problem. Since the engine is off it is possible to shift your gears, this means that the + str (XXX) + gearbox is operational. Once the engine is started, it is impossible. The problem must come from the clutch. Generally it will be necessary to replace the entire clutch kit. You can try to dismantle it and look at the state of all the components. As a reminder, it is advisable to replace the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears pass, the engine stopped or in running condition, it's really unpleasant. The first thing to look at is the state of the gearbox of your + str (XXX) +. There is a high probability that it will be out of service. To discern where the problem comes from it's quite simple. If you can push the lever into the guide of one of the gears, but it does not take, the clutch is probably the problem. If the lever seems to be blocked and you cannot push it, the problem probably comes from the gearbox. For both, you most certainly need to replace one or more parts.