The clutch and the steering are two mechanical devices that the motorist controls. One, however, tends to deteriorate faster than the other: it is the clutch system naturally. With in particular the gearbox, which is closely linked. It happens relatively regularly that gearshift problems occur on this + str (XXX) +. And even if the clutch is frequently involved, it sometimes happens that we are surprised at the source of the problems. In addition, it avoids from time to time to change the whole kit. So these are the gear change issues the most usual.speed-pass-more-Seat-Fura

+ str (XXX) +: Impossible to pass one of the speeds

It sometimes happens that one of the gears no longer shifts. Or only even or odd speeds. In this situation, the clutch is worn. However, it is not inevitably linked to the whole clutch kit or gearbox of your + str (XXX) +. The problem may come from a link or a rubber that holds it. The problem can also arise from the gearbox. It is possible to dismantle it in order to check that no foreign element is blocking it. If it is defective, you must change it.

Unable to change gear once the + str (XXX) + engine is started

Unfortunately, this is a fairly recurring problem. Since the engine block is off it is possible to shift your gears, that means that the gearbox of the + str (XXX) + is in good condition. Once the engine block has started, it is impossible. The problem comes from the clutch. Often it will be necessary to change the entire clutch kit. You can try to remove it and check the condition of each of the parts. For information, it is recommended to change the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears pass, the engine stopped or in running condition, it's really unpleasant. One thing to check is the wear and tear on the gearbox of your + str (XXX) +. There is a high probability that the latter will be out of service. In order to understand where the problem comes from it is rather simple. If you can push the lever into the guide of a speed, but the speed does not take, the clutch is probably the problem. If the lever seems to be blocked and you cannot push it, the problem probably comes from the gearbox. For both, you most certainly need to change one or more rooms.