The clutch and steering are the two mechanical devices that the driver controls. One, however, is used to deteriorating faster than the other: it is the clutch mechanism of course. Obviously with the gearbox, which is closely linked. Relatively frequently, gearshift concerns occur on the + str (XXX) +. And even if the clutch is often the cause, it sometimes happens that we are surprised at the cause of the concerns. In addition, this sometimes avoids replacing the entire kit. Here are consequently the gearshift concerns the most regular.speed-pass-plus-seat-marbella

+ str (XXX) +: Impossible to pass one of the speeds

Sometimes one of the gears does not pass any more. Or only even or odd speeds. In this situation, the clutch is damaged. However, this is not necessarily related to the entire clutch kit or gearbox of your + str (XXX) +. It is possible that the malfunction comes from a link or a rubber that holds it. The malfunction can also happen from the gearbox. It is possible to dismantle it in order to check that no foreign element is blocking it. If it is damaged, you must replace it.

Unable to change gear once the + str (XXX) + engine is started

Unfortunately, this is a rather recurring dysfunction. Since the engine is off it is possible to shift your gears, this means that the gearbox of your + str (XXX) + is in good condition. Once the engine is started, it is impossible. The malfunction is due to the clutch. Generally it will be necessary to change the entire clutch kit. You can always remove it and look at the condition of all the parts. As a reminder, it is advisable to change the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears work, the engine stopped as lit, it's really annoying. One thing to look at is the condition of the gearbox of your + str (XXX) +. There is a high probability that it will be HS. In order to discern where the malfunction comes from it's quite simple. If you can push the lever into the speed guide, but the speed does not engage, the clutch is likely to be malfunctioning. If the lever seems to be blocked and you cannot push it, the malfunction probably comes from the gearbox. In both cases, you most certainly need to change one or more parts.