The clutch and the steering are two mechanical devices that the motorist controls. One said that the habit of getting damaged faster than the other: it's the clutch mechanism naturally. Obviously with the gearbox, which is closely linked. Relatively frequently, gearshift problems occur on the + str (XXX) +. And even if the clutch is often the cause, sometimes we are surprised at the cause of the problems. In addition, this at times avoids replacing the complete kit. Here are consequently the gear change issues The most common.speed-pass-plus-Smart-Forvision

+ str (XXX) +: Impossible to pass one of the speeds

It happens from time to time that one of the gears does not pass any more. Or just even or odd speeds. As a result, the clutch is damaged. But this is not necessarily related to the whole clutch kit or gearbox of your + str (XXX) +. It is possible that the problem stems from a link or a rubber that holds it. The problem can also come from the gearbox. It can be removed to check that no foreign component is blocking it. If it is defective, you must replace it.

Unable to change gear once the + str (XXX) + engine is started

Unfortunately, this is a fairly common problem. Since the engine is off it is possible to shift your gears, this means that the gearbox of your + str (XXX) + is operational. Once the engine is started, it is impossible. The problem stems from the clutch. Generally it will be advisable to change the complete clutch kit. You can try to dismantle it and check the condition of all the components. For information, it is recommended to change the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears work, the engine stopped as lit, it's really annoying. The first thing to check is the state of the gearbox of your + str (XXX) +. The chances are that it will be out of service. To discern where the problem comes from, it's quite simple. If you can push the lever in the guide of a speed, but it does not take, the clutch is probably the problem. If the lever seems to be blocked and you cannot push it, the problem probably comes from the gearbox. For both, you most certainly need to change one or more rooms.