Clutch and steering are two mechanical systems that the motorist controls. One, however, is used to being damaged faster than the other: it is the clutch system of course. Obviously with the gearbox, which goes with it. It happens quite regularly that concerns of gear changes occur on this + str (XXX) +. And even if the clutch is frequently involved, it sometimes happens that there are surprises about the cause of the problems. Also, it avoids at times replacing the entire kit. Here are consequently the gearshift concerns the most regular.speed-pass-more-Suzuki-Baleno

+ str (XXX) +: Impossible to pass one of the speeds

It sometimes happens that one of the gears no longer shifts. Or only even or odd speeds. In this situation, the clutch is worn. However, this is not inevitably due to the whole of the clutch kit or gearbox of your + str (XXX) +. The problem may come from a link or a rubber that holds it. The problem can also arise from the gearbox. It can be removed to check that nothing outside is blocking it. If it is defective, it will have to be changed.

Unable to shift gear once the + str (XXX) + engine is running

Unfortunately, this is a fairly recurring problem. Since the engine block is off, it is still possible to shift your gears, this means that the gearbox of the + str (XXX) + is in good condition. Once the engine block has started, it is impossible. The problem comes from the clutch. Usually it will be necessary to replace the entire clutch kit. You can try to remove it and look at the condition of all the parts. For your information, it is advisable to replace the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears are working, the engine off as on, it's really annoying. The first thing to look at is the state of the gearbox of your + str (XXX) +. There is a high probability that it will be HS. To discern where the problem came from, it's quite simple. If you can push the lever in the guide of one of the gears, but the gear does not take, the clutch is probably the problem. If the lever seems to be blocked and you cannot push it, the problem is certainly with the gearbox. For both, it will most certainly replace one or more parts.