Clutch and steering are the two mechanical systems that the driver controls. One, however, is used to deteriorating faster than the other: it is the clutch system of course. Obviously with the gearbox, closely linked. Quite frequently, gearshift malfunctions occur on this + str (XXX) +. And even if the clutch is frequently the cause, it sometimes happens that we have surprises about the source of the malfunctions. Also, this at times avoids changing the entire kit. So these are the gearshift malfunctions the most common.
+ str (XXX) +: Impossible to pass one of the speeds
It happens from time to time that one of the gears does not pass any more. Or only even or odd speeds. Therefore, the clutch is worn. However, this is not inevitably linked to the whole of the clutch kit or gearbox of your + str (XXX) +. The problem may be caused by a link or a rubber that holds it. The problem can also arise from the gearbox. It is possible to disassemble it to check that no foreign component is blocking it. If it is damaged, it must be replaced.
Unable to shift gear once the + str (XXX) + engine is running
Unfortunately, this is a fairly common problem. Since the engine block is off, it is possible to shift your gears, this implies that the gearbox of your + str (XXX) + is in good condition. Once the engine block is on, it is impossible. The problem stems from the clutch. Usually it will be necessary to replace the entire clutch kit. You can always dismantle it and check the condition of all the parts. As a reminder, it is advisable to replace the clutch every 150 km.
+ str (XXX) +: no speed passes
If none of the gears pass, the engine stopped as lit, it's really unpleasant. One thing to check is the wear and tear on the gearbox of your + str (XXX) +. Chances are that it will be out of service. In order to discern where the problem came from it's relatively easy. If you can put the lever in the guide of a speed, but that one does not engage, it is the clutch which undoubtedly has a problem. If the lever seems to be blocked and you cannot push it, the problem is probably caused by the gearbox. For both, it is most certainly necessary to replace one or more parts.