The clutch and steering are the two mechanical devices that the driver steers. One said that the habit of getting damaged faster than the other: it is the clutch mechanism of course. With in particular the gearbox, which is closely linked. It happens rather regularly that gearshift problems occur on this + str (XXX) +. And even if the clutch is regularly involved, it sometimes happens that we have surprises about the cause of the problems. In addition, it avoids from time to time to replace the entire kit. So here are the gear change issues the most common.
+ str (XXX) +: Impossible to pass one of the speeds
It often happens that one of the gears no longer shifts. Or just even or odd speeds. In this situation, the clutch is damaged. But it is not necessarily related to the whole clutch kit or gearbox of your + str (XXX) +. It happens that the problem comes from a link or a rubber which holds it. The problem can also come from the gearbox. You can drop it to verify that no foreign component is blocking it. If it is defective, it must be changed.
Unable to shift gear once the + str (XXX) + engine is running
Unfortunately, this is a fairly recurring problem. Since the engine block is off it is possible to shift your gears, this implies that the gearbox of the + str (XXX) + is in good condition. Once the engine block has started, it is impossible. The problem comes from the clutch. In general it will be advisable to replace the entire clutch kit. You can try to deposit it and check the condition of each of the components. As a reminder, it is recommended to replace the clutch every 150 km.
+ str (XXX) +: no speed passes
If none of the gears are working, the engine off or in working order, it's really unpleasant. One thing to check is the condition of the gearbox of your + str (XXX) +. There is a good chance that it will be out of service. To understand where the problem comes from is relatively easy. If you can push the lever into the guide of a speed, but it does not engage, it is the clutch that probably presents a problem. If the lever seems to be blocked and you cannot push it, the problem is probably caused by the gearbox. For both, it is very likely to replace one or more parts.