The clutch and the steering are two mechanical devices that the motorist directs. One nevertheless has the habit of deteriorating faster than the other: it is the clutch system naturally. With of course the gearbox, which is closely linked. Relatively frequently, gearshift concerns occur on the + str (XXX) +. And even if the clutch is often involved, it happens that we have surprises about the source of the worries. In addition, it avoids from time to time to change the whole kit. So these are the gearshift concerns the most regular.
+ str (XXX) +: Impossible to pass one of the speeds
Sometimes one of the gears does not pass any more. Or only even or odd speeds. Therefore, the clutch is worn. But it is not necessarily due to the entire clutch kit or gearbox of your + str (XXX) +. Sometimes the malfunction comes from a link or a rubber that holds it. The malfunction can still occur from the gearbox. It can be dismantled in order to check that no external component is blocking it. If the latter is defective, it must be changed.
Unable to change gear once the + str (XXX) + engine is started
Unfortunately, this is a fairly recurring dysfunction. Since the engine block is off it is possible to shift your gears, this means that the gearbox of the + str (XXX) + is in good condition. Once the engine block is running, it is impossible. The malfunction must come from the clutch. In general it will be essential to replace the entire clutch kit. You can always remove it and look at the state of all the components. As a reminder, it is recommended to replace the clutch every 150 km.
+ str (XXX) +: no speed passes
If none of the gears work, the engine stopped as lit, it's really unpleasant. One thing to watch is the wear and tear on the gearbox of your + str (XXX) +. Chances are that it will be out of service. To discern where the malfunction comes from it's quite easy. If you can push the lever in the guide of one of the gears, but that one does not take, it is the clutch which probably presents a malfunction. If the lever seems to be blocked and you cannot push it, the malfunction probably comes from the gearbox. For both, it will most likely be necessary to replace one or more parts.