Clutch and steering are two mechanical systems that the driver controls. One nevertheless has a habit of wearing out more quickly than the other: it is the clutch system of course. With in particular the gearbox, which goes with it. It happens relatively regularly that gearshift problems arise on the + str (XXX) +. And even if the clutch is frequently involved, it happens that we have surprises on the cause of the problems. In addition, it sometimes avoids replacing the entire kit. Here are therefore the gearshift concerns the most regular.speed-pass-more-Suzuki-Swift-4

+ str (XXX) +: Impossible to pass one of the speeds

It sometimes happens that one of the speeds does not pass anymore. Or only even or odd speeds. As a result, the clutch is damaged. But this is not necessarily due to the entire clutch kit or gearbox of your + str (XXX) +. The problem may be with a connecting rod or rubber holding it. The problem can also come from the gearbox. You can dismantle it to verify that no foreign component is blocking it. If it is damaged, it will need to be replaced.

Unable to shift gear once the + str (XXX) + engine is running

Unfortunately, this is a fairly common problem. Since the engine is off, it is possible to change gears, this implies that the + str (XXX) + gearbox is operational. Once the engine is running, it is impossible. The problem is with the clutch. Generally it will be advisable to change the entire clutch kit. You can try to put it down and check the condition of all the parts. For information, it is recommended to change the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears are working, with the engine stopped as if on, it's really annoying. One thing to check is the condition of your str (XXX) + gearbox. There may be a high probability that it is out of service. In order to understand where the problem comes from it is quite easy. If you can squeeze the lever into the guide of one of the speeds, but the speed does not pick up, the clutch is probably having a problem. If the lever seems stuck and you can't push it, the problem is probably with the gearbox. For one like the other, it will certainly be necessary to change one or more parts.