The clutch and the steering are two mechanical systems that the motorist directs. One nevertheless has the habit of deteriorating faster than the other: it is the clutch mechanism naturally. With of course the gearbox, which is closely linked. Relatively regularly, gearshift malfunctions occur on the + str (XXX) +. And even if the clutch is often the cause, sometimes we have surprises about the source of the malfunctions. It also avoids replacing the complete kit from time to time. Here are consequently the gearshift malfunctions The most common.
+ str (XXX) +: Impossible to pass one of the speeds
Sometimes one of the gears does not pass any more. Or just even or odd speeds. In this case, the clutch is worn. However, this is not inevitably due to the entire clutch kit or gearbox of your + str (XXX) +. It may be that the problem comes from a link or a rubber that holds it. The problem can also arise from the gearbox. It is possible to remove it to check that no external component is blocking it. If it is damaged, you must replace it.
Unable to shift gear once the + str (XXX) + engine is running
Unfortunately, this is a fairly common concern. Since the engine block is off, it is still possible to shift your gears, this implies that the gearbox of your + str (XXX) + is operational. Once the engine block is running, it is impossible. The concern comes from the clutch. Usually it will be necessary to change the complete clutch kit. You can try to deposit it and check the condition of each of the components. As a reminder, it is still recommended to change the clutch every 150 km.
+ str (XXX) +: no speed passes
If none of the gears are working, the engine off or in working order, it's really annoying. The first thing to check is the state of the gearbox of your + str (XXX) +. Chances are that it will be out of service. To discern where the concern comes from, it's quite simple. If you can push the lever in the guide of a speed, but that one does not engage, it is the clutch which probably presents a problem. If the lever seems to be blocked and you cannot push it, the problem probably comes from the gearbox. In both cases, you most likely need to change one or more parts.