Clutch and steering are two mechanical systems that the driver controls. One said it wont be damaged faster than the other: it is the clutch system obviously. With in particular the gearbox, which is closely linked. It happens rather regularly that gearshift problems occur on this + str (XXX) +. And even if the clutch is a frequent cause, you may be surprised at the cause of the problems. In addition, it sometimes avoids replacing the complete kit. These are the gear change issues The most common.
+ str (XXX) +: Impossible to pass one of the speeds
It sometimes happens that one of the gears no longer shifts. Or just even or odd speeds. In this situation, the clutch is worn. However, this is not inevitably due to the entire clutch kit or gearbox of your + str (XXX) +. It happens that the concern comes from a link or a rubber which holds it. The problem can also come from the gearbox. You can disassemble it to check that no foreign component is blocking it. If it is defective, you must change it.
Unable to change gear once the + str (XXX) + engine is started
Unfortunately, this is a fairly common concern. Since the engine is off, it is still possible to shift your gears, this implies that the + str (XXX) + gearbox is operational. Once the engine is running, it is impossible. The concern comes from the clutch. Usually it will be necessary to replace the complete clutch kit. You can always remove it and check the condition of each of the components. For your information, it is still recommended to replace the clutch every 150 km.
+ str (XXX) +: no speed passes
If none of the gears work, the engine stopped or in working order, it's really annoying. The first thing to check is the condition of the gearbox of your + str (XXX) +. There is a high probability that the latter will be HS. In order to understand where the worry is coming from it's quite easy. If you can push the lever into the guide of one of the gears, but the gear does not engage, the clutch is probably the problem. If the lever seems to be stuck and you cannot push it, the problem probably comes from the gearbox. In both cases, you will most certainly need to replace one or more parts.