The clutch and the steering are two mechanical devices that the motorist directs. One, however, is used to wear out faster than the other: it is the clutch system of course. With in particular the gearbox, which is closely linked. It happens relatively frequently that gearshift concerns occur on this + str (XXX) +. And even if the clutch is frequently involved, it sometimes happens that we are surprised at the reason for the concerns. In addition, it sometimes avoids replacing the complete kit. So here are the gearshift concerns the most regular.
+ str (XXX) +: Impossible to pass one of the speeds
Sometimes one of the gears no longer shifts. Or only even or odd speeds. In this situation, the clutch is damaged. However, this is not necessarily linked to the whole clutch kit or gearbox of your + str (XXX) +. Sometimes the malfunction comes from a link or a rubber that holds it. The malfunction can also come from the gearbox. It can be disassembled to check that no foreign component is blocking it. If it is defective, it must be changed.
Unable to change gear once the + str (XXX) + engine is started
It is unfortunately a rather frequent dysfunction. Since the engine is off, it is still possible to shift your gears, this means that the gearbox of your + str (XXX) + is operational. Once the engine is running, it is impossible. The malfunction comes from the clutch. Usually it will be essential to replace the complete clutch kit. You can always remove it and look at the condition of all the parts. As a reminder, it is still advisable to replace the clutch every 150 km.
+ str (XXX) +: no speed passes
If none of the gears are working, the engine off as on, it's really annoying. One thing to look at is the condition of the gearbox of your + str (XXX) +. There is a high probability that it will be HS. In order to discern where the dysfunction comes from, it's rather simple. If you can push the lever in the guide of one of the speeds, but it does not take, it is the clutch which undoubtedly presents a malfunction. If the lever seems to be blocked and you cannot push it, the malfunction is certainly due to the gearbox. In both cases, it is most certainly necessary to replace one or more parts.