The clutch and steering are the two mechanical devices that the driver steers. One has said that it wears out faster than the other: it's the clutch system of course. Of course with the gearbox, in close connection. It happens quite frequently that gearshift problems occur on this + str (XXX) +. And even if the clutch is often the cause, sometimes we are surprised at the cause of the problems. In addition, this sometimes prevents the entire kit from being changed. So here are the gear change issues The most common.speed-pass-more-Toyota-Auris-2-Tourings

+ str (XXX) +: Impossible to pass one of the speeds

It often happens that one of the gears no longer shifts. Or only even or odd speeds. In this case, the clutch is worn. However, this is not necessarily due to the entire clutch kit or gearbox of your + str (XXX) +. It happens that the malfunction comes from a link or a rubber that holds it. The malfunction can also come from the gearbox. You can drop it to check that nothing outside is blocking it. If the latter is damaged, it must be changed.

Unable to change gear once the + str (XXX) + engine is started

It is unfortunately a fairly recurrent dysfunction. Since the engine block is off it is possible to shift your gears, this implies that the gearbox of the + str (XXX) + is operational. Once the engine block has started, it is impossible. The malfunction comes from the clutch. In general it will be necessary to change the entire clutch kit. You can always disassemble it and look at the condition of all the parts. For information, it is recommended to change the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears work, the engine off or in working order, it's really annoying. One thing to look at is the condition of the gearbox of your + str (XXX) +. There is a high probability that the latter will be out of service. To discern where the malfunction comes from it's quite easy. If you can push the lever into the guide of a speed, but the speed does not take, it is the clutch which probably presents a malfunction. If the lever seems to be blocked and you cannot push it, the malfunction probably comes from the gearbox. For both, it is most certainly necessary to change one or more rooms.