The clutch and the steering are two mechanical systems that the motorist directs. One is however used to deteriorate faster than the other: it is the clutch mechanism of course. With of course the gearbox, which is closely linked. It happens rather regularly that gearshift problems occur on the + str (XXX) +. And even if the clutch is often involved, it happens that we have surprises about the cause of the problems. In addition, this sometimes avoids replacing the entire kit. So here are the gear change issues the most common.
+ str (XXX) +: Impossible to pass one of the speeds
It often happens that one of the gears no longer shifts. Or only even or odd speeds. In this case, the clutch is damaged. But this is not necessarily related to the entire clutch kit or gearbox of your + str (XXX) +. It sometimes happens that the marigold comes from a link or from a rubber which holds it. The problem can also arise from the gearbox. It can be dismantled to check that no foreign element is blocking it. If it is damaged, you must change it.
Unable to shift gear once the + str (XXX) + engine is running
Unfortunately, this is a fairly frequent concern. Since the engine block is off it is possible to shift your gears, this implies that the gearbox of your + str (XXX) + is in good condition. Once the engine block is on, it is impossible. The concern comes from the clutch. Usually it will be essential to change the entire clutch kit. You can always take it apart and look at the condition of all the components. For information, it is recommended to change the clutch every 150 km.
+ str (XXX) +: no speed passes
If none of the gears pass, the engine off as on, it's really annoying. One thing to watch is the wear and tear on the gearbox of your + str (XXX) +. There is a good chance that it will be out of service. To understand where the problem comes from it's quite easy. If you can put the lever in the guide of a speed, but it does not engage, it is the clutch that probably presents a problem. If the lever seems to be blocked and you cannot push it, the problem probably comes from the gearbox. For both, you most likely need to change one or more parts.