The clutch and steering are the two mechanical devices that the driver controls. One, however, is used to wear out faster than the other: it is the clutch system of course. With of course the gearbox, which is closely linked. It happens rather regularly that gearshift concerns arise on the + str (XXX) +. And even if the clutch is frequently involved, it sometimes happens that we are surprised at the cause of the concerns. In addition, it sometimes avoids having to change the complete kit. Here are the gearshift concerns The most common.
+ str (XXX) +: Impossible to pass one of the speeds
It sometimes happens that one of the gears no longer shifts. Or just even or odd speeds. In this situation, the clutch is in poor condition. However, this is not necessarily due to the entire clutch kit or gearbox of your + str (XXX) +. It may be that the problem comes from a link or a rubber that holds it. The problem can still come from the gearbox. You can disassemble it to check that no foreign component is blocking it. If it is damaged, it will have to be replaced.
Unable to shift gear once the + str (XXX) + engine is running
Unfortunately, this is a fairly frequent concern. Since the engine is off it is possible to shift your gears, it means that the gearbox of your + str (XXX) + is in good condition. Once the engine is running, it is impossible. The problem stems from the clutch. Usually it will be necessary to replace the complete clutch kit. You can try to put it down and look at the condition of all the parts. For information, it is advisable to replace the clutch every 150 km.
+ str (XXX) +: no speed passes
If none of the gears pass, the engine stopped as lit, it's really annoying. One thing to look at is the condition of the gearbox of your + str (XXX) +. There is a good chance that the latter is HS. To discern where the problem comes from, it's quite simple. If you can push the lever into the guide of a speed, but it does not engage, it is the clutch that probably has a problem. If the lever seems to be stuck and you cannot push it, the problem certainly comes from the gearbox. For both, it will most certainly have to replace one or more parts.