The clutch and the steering are two mechanical devices that the motorist controls. One nevertheless tends to deteriorate faster than the other: it is the clutch mechanism of course. With in particular the gearbox, which goes with it. It happens rather regularly that concerns of gear changes occur on this + str (XXX) +. And even if the clutch is regularly involved, it happens that we have surprises about the source of the worries. Also, it sometimes avoids changing the entire kit. Here are consequently the gearshift concerns the most regular.speed-pass-more-Toyota-Camry-3

+ str (XXX) +: Impossible to pass one of the speeds

It often happens that one of the gears no longer shifts. Or only even or odd speeds. In this case, the clutch is in poor condition. But that is not inevitably linked to the whole of clutch kit or gearbox of your + str (XXX) +. The problem may be caused by a link or a rubber that holds it. The problem can also arise from the gearbox. You can remove it to check that no external component is blocking it. If it is damaged, you must replace it.

Unable to shift gear once the + str (XXX) + engine is running

Unfortunately, this is a fairly common problem. Since the engine is off it is possible to shift your gears, this implies that the gearbox of your + str (XXX) + is operational. Once the engine is running, it is impossible. The problem must come from the clutch. Usually it will be essential to replace the entire clutch kit. You can try to disassemble it and check the condition of all components. For information, it is recommended to replace the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears are working, the engine off as on, it's really annoying. One thing to check is the condition of the gearbox of your + str (XXX) +. There is a high probability that it will be HS. In order to discern where the problem is coming from it's pretty easy. If you can push the lever into the guide of one of the gears, but the gear does not take, then the clutch is certainly a problem. If the lever seems to be stuck and you can't push it, the problem is probably the gearbox. In either case, you will most likely need to replace one or more parts.