The clutch and the steering are the two mechanical devices that the motorist controls. One, however, is used to deteriorating faster than the other: it is the clutch system of course. With of course the gearbox, which goes with it. It happens rather regularly that concerns of gear changes happen on this + str (XXX) +. And even if the clutch is often the cause, it sometimes happens that we are surprised at the reason for the concerns. In addition, this sometimes avoids having to change the entire kit. These are the gearshift concerns the most usual.speed-pass-more-Toyota-Corolla-6

+ str (XXX) +: Impossible to pass one of the speeds

It sometimes happens that one of the gears no longer shifts. Or only even or odd speeds. As a result, the clutch is in poor condition. However, this is not necessarily due to the whole clutch kit or gearbox of your + str (XXX) +. The malfunction may come from a link or from the rubber that holds it. The malfunction can also come from the gearbox. It can be removed to check that no foreign component is blocking it. If the latter is damaged, it must be changed.

Unable to change gear once the + str (XXX) + engine is started

It is unfortunately a rather frequent dysfunction. Since the engine is off it is possible to shift your gears, this implies that the gearbox of the + str (XXX) + is in good condition. Once the engine is running, it is impossible. The malfunction must come from the clutch. Usually it will be advisable to change the entire clutch kit. You can try to disassemble it and check the condition of each of the parts. For information, it is advisable to change the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears are working, the engine stopped as lit, it's really annoying. The first thing to check is the state of the gearbox of your + str (XXX) +. There is a good chance that the latter is HS. To discern where the malfunction comes from it's quite simple. If you can put the lever in the guide of a speed, but that the speed does not take, it is the clutch which undoubtedly has a malfunction. If the lever seems to be blocked and you cannot push it, the malfunction is probably due to the gearbox. In both cases, you will most likely need to change one or more parts.