Clutch and steering are two mechanical systems that the driver controls. One, however, wont deteriorate faster than the other: it is the clutch device of course. Obviously with the gearbox, which is closely linked. Quite frequently, gearshift problems occur on the + str (XXX) +. And even if the clutch is regularly involved, it sometimes happens that we have surprises about the source of the problems. It also avoids replacing the complete kit from time to time. So here are the gear change issues the most regular.speed-pass-more-Toyota-Corolla-9

+ str (XXX) +: Impossible to pass one of the speeds

Sometimes one of the gears no longer shifts. Or only even or odd speeds. In this case, the clutch is in poor condition. But this is not necessarily related to the entire clutch kit or gearbox of your + str (XXX) +. It may be that the malfunction is due to a link or a rubber that holds it. The malfunction can still come from the gearbox. It is possible to disassemble it to check that no external component is blocking it. If it is damaged, you must replace it.

Unable to change gear once the + str (XXX) + engine is started

Unfortunately, this is a fairly recurring dysfunction. Since the engine block is off it is possible to shift your gears, this means that the gearbox of your + str (XXX) + is operational. Once the engine block is running, it is impossible. The malfunction comes from the clutch. In general it will be necessary to change the complete clutch kit. You can always remove it and check the condition of all the components. For information, it is advisable to change the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears pass, the engine off as on, it's really annoying. The first thing to check is the condition of the gearbox of your + str (XXX) +. The chances are that it will be out of service. To discern where the malfunction comes from it's quite easy. If you can push the lever in the guide of a speed, but the speed does not take, it is the clutch which undoubtedly holds a malfunction. If the lever seems to be stuck and you cannot push it, the malfunction probably comes from the gearbox. For both, you most certainly need to change one or more rooms.