Clutch and steering are the two mechanical systems that the motorist controls. One, however, is used to being damaged faster than the other: it is the clutch mechanism of course. Obviously with the gearbox, which goes with it. Relatively frequently, gearshift problems occur on this + str (XXX) +. And even if the clutch is often the cause, it sometimes happens that we have surprises about the reason for the problems. In addition, it sometimes avoids having to change the complete kit. These are the gear change issues the most regular.
+ str (XXX) +: Impossible to pass one of the speeds
It sometimes happens that one of the gears no longer shifts. Or only even or odd speeds. In this situation, the clutch is damaged. However, this is not necessarily linked to the entire clutch kit or gearbox of your + str (XXX) +. It may be that the problem comes from a link or a rubber that holds it. The problem can still come from the gearbox. You can disassemble it to check that nothing outside is blocking it. If it is damaged, it will have to be replaced.
Unable to shift gear once the + str (XXX) + engine is running
This is unfortunately a rather frequent concern. Since the engine is off it is possible to shift your gears, this means that the gearbox of the + str (XXX) + is in good condition. Once the engine is started, it is impossible. The problem stems from the clutch. Usually it will be essential to change the complete clutch kit. You can always drop it off and check the condition of all the components. For information, it is advisable to change the clutch every 150 km.
+ str (XXX) +: no speed passes
If none of the gears work, the engine stopped as lit, it's really unpleasant. One thing to check is the condition of the gearbox of your + str (XXX) +. Chances are that it will be out of service. In order to discern where the concern came from, it's quite simple. If you can put the lever in the guide of one of the speeds, but the speed does not take, it is the clutch which certainly presents a problem. If the lever seems to be stuck and you cannot push it, the problem is certainly caused by the gearbox. For both, it will most likely have to change one or more parts.