Clutch and steering are the two mechanical systems that the driver controls. One, however, tends to deteriorate faster than the other: it is the clutch device of course. Obviously with the gearbox, in close connection. Relatively frequently, gearshift concerns occur on the + str (XXX) +. And even if the clutch is regularly involved, it sometimes happens that we are surprised at the cause of the concerns. Also, this sometimes avoids changing the complete kit. So here are the gearshift concerns the most usual.speed-pass-more-Toyota-Dyna

+ str (XXX) +: Impossible to pass one of the speeds

It often happens that one of the gears no longer shifts. Or only even or odd speeds. As a result, the clutch is damaged. But this is not inevitably due to the whole clutch kit or gearbox of your + str (XXX) +. It is possible that the problem comes from a link or a rubber which holds it. The problem can also come from the gearbox. You can disassemble it to check that no foreign component is blocking it. If it is damaged, it must be replaced.

Unable to change gear once the + str (XXX) + engine is started

Unfortunately, this is a fairly recurring problem. Since the engine is off it is possible to shift your gears, this means that the gearbox of the + str (XXX) + is in good condition. Once the engine is started, it is impossible. The problem must come from the clutch. In general it will be advisable to change the complete clutch kit. You can always drop it and look at the status of each of the components. As a reminder, it is advisable to change the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears are working, the engine off as on, it's really annoying. One thing to watch is the wear and tear on the gearbox of your + str (XXX) +. There is a high probability that it will be out of service. To discern where the problem came from it's quite easy. If you can put the lever in the guide of one of the gears, but it does not take, it is the clutch which certainly presents a problem. If the lever seems to be stuck and you can't push it, the problem is probably the gearbox. In both cases, it will most certainly be necessary to change one or more parts.