The clutch and steering are two mechanical devices that the driver steers. One is nonetheless used to deteriorating faster than the other: it is the clutch system naturally. Obviously with the gearbox, which is closely linked. Quite frequently, gearshift problems occur on this + str (XXX) +. And even if the clutch is regularly involved, it sometimes happens that we are surprised at the cause of the problems. In addition, it sometimes avoids having to change the complete kit. Here are consequently the gear change issues the most regular.speed-pass-more-Toyota-Endo

+ str (XXX) +: Impossible to pass one of the speeds

It often happens that one of the gears no longer shifts. Or only even or odd speeds. In this situation, the clutch is in poor condition. But it is not necessarily related to the whole clutch kit or gearbox of your + str (XXX) +. It sometimes happens that the problem comes from a link or from a rubber which holds it. The problem can also come from the gearbox. It is possible to dismantle it to check that no foreign element is blocking it. If it is defective, it will have to be changed.

Unable to change gear once the + str (XXX) + engine is started

Unfortunately, this is a fairly common problem. Since the engine is off it is possible to shift your gears, this implies that the gearbox of the + str (XXX) + is operational. Once the engine is started, it is impossible. The problem comes from the clutch. Usually it will be necessary to change the complete clutch kit. You can always disassemble it and check the condition of all the parts. For information, it is advisable to change the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears pass, the engine stopped as lit, it's really annoying. The first thing to check is the condition of the gearbox of your + str (XXX) +. There is a high probability that it will be HS. To discern where the problem came from, it's pretty simple. If you can push the lever into the guide of a speed, but the speed does not engage, the clutch is certainly a problem. If the lever seems to be blocked and you cannot push it, the problem probably comes from the gearbox. In both cases, you will most likely have to change one or more parts.