The clutch and the steering are two mechanical devices that the motorist directs. One has said that it tends to be damaged faster than the other: it is the clutch system of course. With of course the gearbox, which is closely linked. Relatively frequently, gearshift problems occur on the + str (XXX) +. And even if the clutch is often the cause, it sometimes happens that we are surprised at the source of the problems. In addition, it avoids at times replacing the entire kit. Here are consequently the gear change issues the most usual.speed-pass-more-Toyota-Fine-n

+ str (XXX) +: Impossible to pass one of the speeds

It sometimes happens that one of the gears no longer shifts. Or just even or odd speeds. Therefore, the clutch is worn. But it's not necessarily related to the whole clutch kit or gearbox of your + str (XXX) +. It is possible that the malfunction comes from a link or a rubber that holds it. The malfunction can also happen from the gearbox. You can drop it to check that nothing outside is blocking it. If it is damaged, it must be replaced.

Unable to shift gear once the + str (XXX) + engine is running

It is unfortunately a fairly recurrent dysfunction. Since the engine is off it is possible to shift your gears, it means that the gearbox of the + str (XXX) + is operational. Once the engine is started, it is impossible. The malfunction comes from the clutch. Usually it will be advisable to change the entire clutch kit. You can try to remove it and check the condition of all components. For information, it is recommended to change the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears are working, the engine off as on, it's really annoying. The first thing to check is the wear and tear on the gearbox of your + str (XXX) +. There is a high probability that the latter will be HS. To discern where the malfunction comes from it's quite simple. If you can put the lever in the guide of a speed, but the speed does not engage, it is the clutch which undoubtedly presents a malfunction. If the lever seems to be blocked and you cannot push it, the malfunction certainly comes from the gearbox. In both cases, you will most likely have to change one or more parts.