Clutch and steering are the two mechanical systems that the motorist controls. One has said that it tends to be damaged faster than the other: it is the clutch mechanism of course. Obviously with the gearbox, which goes with it. Relatively frequently, gearshift problems occur on this + str (XXX) +. And even if the clutch is often involved, it happens that we have surprises about the reason for the problems. Also, it sometimes avoids having to change the entire kit. Here are the gear change issues the most common.
+ str (XXX) +: Impossible to pass one of the speeds
It often happens that one of the gears no longer shifts. Or only even or odd speeds. In this case, the clutch is worn. However, this is not necessarily linked to the whole clutch kit or gearbox of your + str (XXX) +. Sometimes the malfunction comes from a link or a rubber that holds it. The malfunction can also come from the gearbox. It can be disassembled to verify that no foreign component is blocking it. If the latter is defective, it must be changed.
Unable to change gear once the + str (XXX) + engine is started
Unfortunately, this is a fairly common malfunction. Since the engine is off it is possible to shift your gears, this implies that the gearbox of the + str (XXX) + is in good condition. Once the engine is running, it is impossible. The malfunction must come from the clutch. Usually it will be necessary to change the entire clutch kit. You can still drop it off and look at the status of all parts. As a reminder, it is recommended to change the clutch every 150 km.
+ str (XXX) +: no speed passes
If none of the gears pass, the engine stopped or in running condition, it's really unpleasant. The first thing to look at is the wear and tear on the gearbox of your + str (XXX) +. There is a good chance that the latter is HS. To discern where the dysfunction came from it's quite simple. If you can put the lever in the guide of one of the gears, but it does not take, it is the clutch which probably has a malfunction. If the lever seems to be stuck and you cannot push it, the malfunction is probably due to the gearbox. For both, it will most likely be necessary to change one or more parts.