The clutch and the steering are two mechanical systems that the motorist directs. One has said that it wears out faster than the other: it is the clutch mechanism of course. Obviously with the gearbox, which goes with it. Relatively frequently, gearshift malfunctions occur on the + str (XXX) +. And even if the clutch is often the cause, it happens that we have surprises about the source of the malfunctions. In addition, it sometimes avoids replacing the complete kit. So here are the gearshift malfunctions the most regular.speed-pass-plus-Toyota-Gt86

+ str (XXX) +: Impossible to pass one of the speeds

It sometimes happens that one of the gears no longer changes. Or just even or odd speeds. In this case, the clutch is damaged. But it is not necessarily related to the entire clutch kit or gearbox of your + str (XXX) +. It is possible that the concern comes from a link or from a rubber which holds it. The problem can also come from the gearbox. It can be removed to check that no external component is blocking it. If it is damaged, you must change it.

Unable to change gear once the + str (XXX) + engine is started

This is unfortunately a rather frequent concern. Since the engine block is off, it is still possible to shift your gears, this means that the gearbox of your + str (XXX) + is in good condition. Once the engine block is on, it is impossible. The concern must come from the clutch. Usually it will be advisable to change the complete clutch kit. You can always dismantle it and check the condition of all the components. For information, it is still advisable to change the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears are working, the engine stopped as lit, it's really annoying. The first thing to check is the state of the gearbox of your + str (XXX) +. There is a good chance that the latter is HS. To discern where the problem comes from, it's pretty easy. If you can push the lever into the guide of a speed, but it does not engage, it is the clutch that probably has a problem. If the lever seems to be blocked and you cannot push it, the problem probably comes from the gearbox. In both cases, you most likely need to change one or more parts.