The clutch and the steering are two mechanical devices that the motorist directs. One, however, is used to wear out faster than the other: it is the clutch system naturally. Obviously with the gearbox, which goes with it. Relatively frequently, gearshift problems occur on this + str (XXX) +. And even if the clutch is frequently involved, it happens that we have surprises about the cause of the problems. In addition, it sometimes avoids having to change the complete kit. So here are the gear change issues the most usual.speed-pass-plus-Toyota-Hi-Ace-3

+ str (XXX) +: Impossible to pass one of the speeds

It sometimes happens that one of the gears no longer shifts. Or only even or odd speeds. In this case, the clutch is worn. However, this is not inevitably due to the whole clutch kit or gearbox of your + str (XXX) +. It is possible that the problem comes from a link or a rubber that holds it. The problem can also arise from the gearbox. It can be removed to check that no foreign component is blocking it. If the latter is damaged, you must replace it.

Unable to shift gear once the + str (XXX) + engine is running

Unfortunately, this is a fairly common concern. Since the engine block is off it is possible to shift your gears, it means that the gearbox of the + str (XXX) + is in good condition. Once the engine block is running, it is impossible. The problem stems from the clutch. In general it will be essential to replace the complete clutch kit. You can try to remove it and check the condition of each of the parts. For information, it is advisable to replace the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears pass, the engine stopped as lit, it's really annoying. The first thing to check is the condition of the gearbox of your + str (XXX) +. The chances are that it will be out of service. In order to discern where the problem comes from, it's quite simple. If you can push the lever in the guide of one of the speeds, but the speed does not take, it is the clutch which certainly holds a concern. If the lever seems to be blocked and you cannot push it, the problem probably comes from the gearbox. In both cases, you will most certainly need to replace one or more parts.