The clutch and the steering are two mechanical devices that the motorist directs. One said that the habit of deteriorating faster than the other: it's the clutch system of course. With in particular the gearbox, which goes with it. Relatively frequently, gearshift problems occur on this + str (XXX) +. And even if the clutch is often involved, it happens that we have surprises about the source of the problems. In addition, this at times avoids changing the entire kit. So here are the gear change issues the most common.
+ str (XXX) +: Impossible to pass one of the speeds
Sometimes one of the gears does not pass any more. Or just even or odd speeds. In this situation, the clutch is damaged. But this is not necessarily related to the whole clutch kit or gearbox of your + str (XXX) +. It is possible that the problem comes from a link or a rubber which holds it. The problem can also arise from the gearbox. You can disassemble it to check that no foreign component is blocking it. If the latter is damaged, it will have to be changed.
Unable to change gear once the + str (XXX) + engine is started
Unfortunately, this is a fairly common problem. Since the engine is off it is possible to shift your gears, this means that the gearbox of your + str (XXX) + is in good condition. Once the engine is started, it is impossible. The problem stems from the clutch. Often it will be necessary to replace the entire clutch kit. You can try to disassemble it and check the condition of all the parts. For information, it is recommended to replace the clutch every 150 km.
+ str (XXX) +: no speed passes
If none of the gears are working, the engine off as on, it's really annoying. The first thing to check is the wear and tear on the gearbox of your + str (XXX) +. There is a high probability that it will be HS. In order to understand where the problem is coming from it's pretty easy. If you can put the lever in the guide of one of the speeds, but the speed does not engage, it is the clutch which probably holds a problem. If the lever seems to be blocked and you cannot push it, the problem is probably caused by the gearbox. In both cases, one or more parts will most certainly have to be replaced.