The clutch and the steering are the two mechanical systems that the driver controls. One has that said the habit of being damaged more quickly than the other: it is the clutch mechanism of course. With of course the gearbox, in close connection. It happens quite frequently that gearshift malfunctions occur on this + str (XXX) +. And even if the clutch is regularly involved, it happens that we are surprised at the source of the malfunctions. In addition, it sometimes avoids replacing the complete kit. Here are the gearshift malfunctions the most usual.speed-pass-more-Toyota-Land-Cruiser-Serie-150

+ str (XXX) +: Impossible to pass one of the speeds

It often happens that one of the gears no longer shifts. Or just even or odd speeds. In this situation, the clutch is damaged. However, this is not necessarily due to the whole clutch kit or gearbox of your + str (XXX) +. The malfunction may be caused by a connecting rod or rubber that holds it. The malfunction can also happen from the gearbox. You can drop it to check that no external element is blocking it. If it is damaged, it must be replaced.

Unable to shift gear once the + str (XXX) + engine is running

Unfortunately, this is a fairly frequent malfunction. Since the engine block is off, it is still possible to shift gears, this implies that the gearbox of your + str (XXX) + is in good condition. Once the engine block has started, it is impossible. The fault must be with the clutch. Usually it will be advisable to replace the complete clutch kit. You can still put it down and watch the condition of all the components. As a reminder, it is still recommended to replace the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears work, with the engine off as on, it's really unpleasant. One thing to watch is the condition of your str (XXX) + gearbox. There may be a high probability that the latter is HS. In order to understand where the dysfunction came from, it is rather easy. If you can push the lever into the guide of one of the speeds, but the speed does not engage, the clutch is probably malfunctioning. If the lever seems stuck and you cannot push it, the fault is most likely with the gearbox. In either case, one or more parts will most likely need to be replaced.