Clutch and steering are two mechanical systems that the driver controls. One has said that it wears out faster than the other: it's the clutch mechanism of course. Obviously with the gearbox, which goes with it. Quite frequently, gearshift malfunctions occur on the + str (XXX) +. And even if the clutch is frequently involved, it happens that we have surprises about the source of the malfunctions. In addition, this sometimes avoids changing the complete kit. So these are the gearshift malfunctions the most regular.speed-pass-more-Toyota-Land-Cruiser-Serie-70

+ str (XXX) +: Impossible to pass one of the speeds

Sometimes one of the gears no longer shifts. Or just even or odd speeds. In this situation, the clutch is damaged. But this is not necessarily related to the whole clutch kit or gearbox of your + str (XXX) +. The problem may be caused by a link or a rubber that holds it. The problem can also arise from the gearbox. It can be removed to check that no external component is blocking it. If it is damaged, it will need to be replaced.

Unable to shift gear once the + str (XXX) + engine is running

Unfortunately, this is a fairly recurring problem. Since the engine is off it is possible to shift your gears, this implies that the gearbox of the + str (XXX) + is operational. Once the engine is started, it is impossible. The problem must come from the clutch. In general it will be essential to change the complete clutch kit. You can try to remove it and look at the state of all the components. As a reminder, it is advisable to change the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears work, the engine off or in working order, it's really annoying. The first thing to look at is the state of the gearbox of your + str (XXX) +. There may be a good chance that it will be out of service. To understand where the problem comes from is quite easy. If you can put the lever in the guide of a speed, but that the speed does not engage, it is the clutch which probably holds a problem. If the lever seems to be stuck and you cannot push it, the problem probably comes from the gearbox. In both cases, you will most likely have to change one or more parts.