The clutch and the steering are two mechanical devices that the motorist controls. One has that said custom to deteriorate faster than the other: it is the clutch system of course. With obviously the gearbox, which goes with it. Rather, it often happens that gearshift problems occur on this + str (XXX) +. And even if the clutch is frequently involved, sometimes we have surprises about the cause of the problems. Also, this avoids from time to time changing the entire kit. So here are the gear change issues the most usual.speed-pass-more-Toyota-Land-Cruiser-Serie-90

+ str (XXX) +: Impossible to pass one of the speeds

It happens regularly that one of the gears no longer works. Or only even or odd speeds. In this case, the clutch is in bad condition. However, this is not necessarily related to the entire clutch kit or gearbox of your + str (XXX) +. It is possible that the problem is due to a rod or a rubber that holds it. The problem can still come from the gearbox. It can be removed to check that no external component is blocking it. If the latter is damaged, it will have to be replaced.

Unable to change gear once the + str (XXX) + engine is started

Unfortunately, this is a fairly common problem. Since the engine is off, it is possible to change gears, this implies that the + str (XXX) + gearbox is operational. Once the engine is on, it is impossible. The problem is with the clutch. In general, it will be essential to change the entire clutch kit. You can still remove it and check the condition of all components. For information, it is recommended to change the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears are working with the engine off or running, it's really annoying. One thing to check is the wear of the gearbox of your + str (XXX) +. There is a good chance that the latter is out of service. In order to discern where the problem comes from it is relatively easy. If you can squeeze the lever into a gear guide, but the gear won't pick up, the clutch is probably the problem. If the lever seems stuck and you can't push it, the problem is probably with the gearbox. For one like the other, it will certainly be necessary to change one or more parts.