Clutch and steering are the two mechanical systems that the motorist controls. One said that it wont deteriorate faster than the other: it is the clutch system of course. With of course the gearbox, which goes with it. It happens quite regularly that concerns of gear changes happen on the + str (XXX) +. And even if the clutch is often involved, it happens that we are surprised at the source of the problems. Also, it sometimes avoids changing the complete kit. Here are the gearshift concerns the most regular.speed-pass-more-Toyota-Land-Cruiser-Sw-Serie-80

+ str (XXX) +: Impossible to pass one of the speeds

It happens from time to time that one of the gears does not pass any more. Or only even or odd speeds. In this case, the clutch is damaged. However, this is not necessarily due to the entire clutch kit or gearbox of your + str (XXX) +. The problem may be caused by a link or a rubber that holds it. The problem can also come from the gearbox. You can disassemble it to check that no foreign component is blocking it. If it is damaged, you must change it.

Unable to change gear once the + str (XXX) + engine is started

Unfortunately, this is a fairly recurring problem. Since the engine is off, it is still possible to shift your gears, this means that the gearbox of your + str (XXX) + is in good condition. Once the engine is started, it is impossible. The problem must come from the clutch. In general it will be advisable to replace the complete clutch kit. You can always remove it and check the condition of all the parts. For your information, it is still recommended to replace the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears are working, the engine off or in working order, it's really unpleasant. The first thing to check is the condition of the gearbox of your + str (XXX) +. Chances are that it will be out of service. In order to understand where the problem is coming from it's pretty easy. If you can push the lever into the guide of a speed, but the speed does not engage, the clutch is probably the problem. If the lever seems to be blocked and you cannot push it, the problem probably comes from the gearbox. For both, you most certainly need to replace one or more parts.