The clutch and steering are the two mechanical devices that the driver steers. One nevertheless has the habit of deteriorating faster than the other: it is the clutch mechanism of course. With in particular the gearbox, which is closely linked. It happens quite regularly that concerns of gear changes occur on this + str (XXX) +. And even if the clutch is frequently involved, it sometimes happens that we are surprised at the cause of the problems. Also, this at times avoids replacing the complete kit. So these are the gearshift concerns the most regular.speed-pass-more-Toyota-Mirai

+ str (XXX) +: Impossible to pass one of the speeds

Sometimes one of the gears no longer shifts. Or only even or odd speeds. In this situation, the clutch is in poor condition. But this is not inevitably due to the whole clutch kit or gearbox of your + str (XXX) +. The problem may be caused by a link or a rubber that holds it. The problem can also arise from the gearbox. You can drop it to check that nothing outside is blocking it. If the latter is damaged, it will have to be changed.

Unable to shift gear once the + str (XXX) + engine is running

Unfortunately, this is a fairly common problem. Since the engine block is off, it is possible to shift your gears, this implies that the gearbox of your + str (XXX) + is operational. Once the engine block has started, it is impossible. The problem comes from the clutch. Usually it will be advisable to replace the complete clutch kit. You can always remove it and check the condition of all the parts. For information, it is recommended to replace the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears are working, the engine stopped or in working order, it's really unpleasant. One thing to check is the wear and tear on the gearbox of your + str (XXX) +. The chances are that it will be out of service. To understand where the problem comes from it's relatively simple. If you can push the lever in the guide of a speed, but the speed does not engage, it is the clutch which undoubtedly holds a problem. If the lever seems to be blocked and you cannot push it, the problem is certainly with the gearbox. For both, it will most likely have to replace one or more parts.