The clutch and steering are two mechanical devices that the driver steers. One, however, is used to wear out faster than the other: it is the clutch device of course. With of course the gearbox, which is closely linked. Rather frequently, gearshift malfunctions occur on this + str (XXX) +. And even if the clutch is often the cause, it sometimes happens that we are surprised at the source of the malfunctions. In addition, it avoids at times replacing the complete kit. So here are the gearshift malfunctions The most common.
+ str (XXX) +: Impossible to pass one of the speeds
It happens from time to time that one of the gears does not pass any more. Or just even or odd speeds. In this situation, the clutch is in poor condition. But that is not inevitably linked to the whole of clutch kit or gearbox of your + str (XXX) +. It is possible that the problem comes from a link or a rubber which holds it. The problem can also arise from the gearbox. You can drop it to check that nothing outside is blocking it. If it is damaged, it will need to be replaced.
Unable to shift gear once the + str (XXX) + engine is running
Unfortunately, this is a fairly frequent problem. Since the engine is off it is possible to shift your gears, this means that the gearbox of your + str (XXX) + is operational. Once the engine is running, it is impossible. The problem comes from the clutch. Often it will be necessary to replace the complete clutch kit. You can try to remove it and check the condition of each of the parts. For information, it is advisable to replace the clutch every 150 km.
+ str (XXX) +: no speed passes
If none of the gears work, the engine stopped as lit, it's really unpleasant. The first thing to check is the condition of the gearbox of your + str (XXX) +. There may be a high probability that this is HS. In order to discern where the problem is coming from it's pretty easy. If you can push the lever into the guide of a speed, but it does not engage, it is the clutch that probably presents a problem. If the lever seems to be stuck and you cannot push it, the problem is probably caused by the gearbox. For both, it will most likely be necessary to replace one or more parts.