Clutch and steering are the two mechanical systems that the driver controls. One, however, is used to deteriorating faster than the other: it is the clutch system of course. Obviously with the gearbox, which goes with it. It happens relatively regularly that gearshift concerns occur on this + str (XXX) +. And even if the clutch is often involved, it sometimes happens that we have surprises about the reason for the concerns. In addition, it avoids at times to change the complete kit. So here are the gearshift concerns the most usual.
+ str (XXX) +: Impossible to pass one of the speeds
It happens from time to time that one of the gears no longer shifts. Or only even or odd speeds. In this situation, the clutch is worn. However, this is not inevitably linked to the whole of the clutch kit or gearbox of your + str (XXX) +. It happens that the problem comes from a link or a rubber that holds it. The problem can also arise from the gearbox. It can be put down to check that nothing outside is blocking it. If it is damaged, you must replace it.
Unable to change gear once the + str (XXX) + engine is started
Unfortunately, this is a fairly common problem. Since the engine block is off, it is still possible to shift your gears, this means that the gearbox of the + str (XXX) + is operational. Once the engine block is running, it is impossible. The problem comes from the clutch. Usually it will be essential to change the complete clutch kit. You can try to remove it and check the condition of all the components. For information, it is still recommended to change the clutch every 150 km.
+ str (XXX) +: no speed passes
If none of the gears pass, the engine stopped as lit, it's really annoying. The first thing to check is the state of the gearbox of your + str (XXX) +. There may be great chances that it will be HS. To discern where the problem comes from, it's relatively simple. If you can push the lever in the guide of a speed, but it does not take, the clutch is probably a problem. If the lever seems to be blocked and you cannot push it, the problem is probably caused by the gearbox. For both, you most certainly need to change one or more rooms.