The clutch and the steering are the two mechanical devices that the motorist controls. One, however, is in the habit of deteriorating faster than the other: it is obviously the clutch device. Obviously with the gearbox, in close connection. Relatively frequently, gearshift malfunctions occur on this + str (XXX) +. And even if the clutch is frequently involved, it sometimes happens that we are surprised at the cause of the malfunctions. In addition, this occasionally avoids replacing the entire kit. These are the gearshift malfunctions the most usual.speed-pass-more-Toyota-Paseo

+ str (XXX) +: Impossible to pass one of the speeds

It often happens that one of the gears no longer shifts. Or just even or odd speeds. As a result, the clutch is damaged. But this is not necessarily linked to the whole clutch kit or gearbox of your + str (XXX) +. It is possible that the problem comes from a link or a rubber which holds it. The problem can also arise from the gearbox. It is possible to disassemble it to check that no external component is blocking it. If it is defective, you must replace it.

Unable to shift gear once the + str (XXX) + engine is running

Unfortunately, this is a fairly frequent problem. Since the engine is off, it is still possible to shift your gears, this means that the + str (XXX) + gearbox is operational. Once the engine is started, it is impossible. The problem stems from the clutch. In general it will be advisable to replace the entire clutch kit. You can always disassemble it and look at the condition of all the parts. For your information, it is advisable to replace the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears work, the engine stopped as lit, it's really unpleasant. One thing to watch is the wear and tear on the gearbox of your + str (XXX) +. There may be a high probability that it will be out of service. To discern where the problem comes from it's quite easy. If you can push the lever into the guide of a speed, but the speed does not take, the clutch is certainly the problem. If the lever seems to be stuck and you cannot push it, the problem is probably due to the gearbox. For both, you most likely need to replace one or more parts.