Clutch and steering are two mechanical systems that the driver controls. One has said that it tends to be damaged faster than the other: it is the clutch mechanism naturally. Obviously with the gearbox, which goes with it. It happens quite frequently that gearshift problems occur on this + str (XXX) +. And even if the clutch is often involved, it happens that we have surprises about the reason for the problems. In addition, it saves from time to time replacing the entire kit. Here are the gear change issues the most usual.speed pass-plus-Toyota Picnic

+ str (XXX) +: Impossible to pass one of the speeds

Sometimes one of the gears no longer shifts. Or only even or odd speeds. In this case, the clutch is worn. However, this is not necessarily due to the entire clutch kit or gearbox of your + str (XXX) +. It happens that the concern comes from a link or from a rubber which holds it. The problem can also come from the gearbox. It can be placed in order to check that no foreign element is blocking it. If the latter is damaged, it will have to be replaced.

Unable to shift gear once the + str (XXX) + engine is running

Unfortunately, this is a fairly common concern. Since the engine is off it is possible to shift your gears, that means that the gearbox of the + str (XXX) + is operational. Once the engine is started, it is impossible. The concern must come from the clutch. Usually it will be necessary to change the entire clutch kit. You can try to dismantle it and check the condition of all the components. For information, it is recommended to change the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears pass, the engine stopped as lit, it's really annoying. One thing to check is the wear and tear on the gearbox of your + str (XXX) +. There is a good chance that it will be HS. In order to understand where the problem came from, it's quite easy. If you can put the lever in the guide of one of the speeds, but the speed does not engage, it is the clutch which probably presents a problem. If the lever seems blocked and you cannot push it, the problem certainly comes from the gearbox. In both cases, you will most likely have to change one or more parts.