Clutch and steering are the two mechanical systems that the driver controls. One has said that it wears out faster than the other: it is the clutch mechanism of course. Obviously with the gearbox, which goes with it. Rather regularly, gearshift malfunctions occur on the + str (XXX) +. And even if the clutch is regularly involved, it sometimes happens that we have surprises about the cause of the malfunctions. In addition, this at times avoids changing the entire kit. Here are consequently the gearshift malfunctions the most usual.speed-pass-more-Toyota-Previa

+ str (XXX) +: Impossible to pass one of the speeds

It often happens that one of the gears no longer shifts. Or only even or odd speeds. In this situation, the clutch is worn. However, this is not necessarily linked to the entire clutch kit or gearbox of your + str (XXX) +. It is possible that the malfunction comes from a link or a rubber that holds it. The malfunction can also happen from the gearbox. It can be placed to check that no external element is blocking it. If the latter is damaged, it must be replaced.

Unable to change gear once the + str (XXX) + engine is started

Unfortunately, this is a fairly common malfunction. Since the engine block is off, it is possible to shift your gears, this implies that the gearbox of your + str (XXX) + is operational. Once the engine block is running, it is impossible. The malfunction comes from the clutch. Usually it will be advisable to change the entire clutch kit. You can always dismantle it and check the condition of all the components. For information, it is advisable to change the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears work, the engine stopped as lit, it's really annoying. One thing to check is the wear and tear on the gearbox of your + str (XXX) +. There may be great chances that it will be HS. To understand where the malfunction comes from it's relatively easy. If you can push the lever in the guide of a speed, but that one does not engage, it is the clutch which probably has a malfunction. If the lever seems to be blocked and you cannot push it, the malfunction probably comes from the gearbox. For both, it will most likely have to change one or more parts.