The clutch and steering are the two mechanical devices that the driver steers. One is nonetheless used to deteriorating faster than the other: it is the clutch device of course. With of course the gearbox, which is closely linked. Rather regularly, gearshift malfunctions occur on this + str (XXX) +. And even if the clutch is often the cause, it sometimes happens that we are surprised at the source of the malfunctions. Also, this avoids changing the complete kit from time to time. So here are the gearshift malfunctions The most common.
+ str (XXX) +: Impossible to pass one of the speeds
Sometimes one of the gears no longer shifts. Or only even or odd speeds. In this case, the clutch is worn. However, this is not inevitably linked to the whole of the clutch kit or gearbox of your + str (XXX) +. It may be that the marigold originates from a link or from a rubber which holds it. The problem can also arise from the gearbox. It can be dismantled to check that no external element is blocking it. If it is damaged, you must replace it.
Unable to change gear once the + str (XXX) + engine is started
This is unfortunately a rather frequent concern. Since the engine block is off it is possible to shift your gears, this means that the gearbox of the + str (XXX) + is in good condition. Once the engine block is running, it is impossible. The concern comes from the clutch. Generally it will be essential to change the complete clutch kit. You can always drop it off and check the condition of each of the components. For information, it is recommended to change the clutch every 150 km.
+ str (XXX) +: no speed passes
If none of the gears work, the engine off or in working order, it's really annoying. The first thing to check is the condition of the gearbox of your + str (XXX) +. There may be a high probability that this is HS. In order to understand where the concern comes from, it's pretty easy. If you can put the lever in the guide of a speed, but the speed does not take, it is the clutch which certainly presents a problem. If the lever seems to be blocked and you cannot push it, the problem probably comes from the gearbox. In either case, you most likely need to change one or more parts.