Clutch and steering are two mechanical systems that the driver controls. One, however, tends to be damaged faster than the other: it is the clutch mechanism of course. With of course the gearbox, which is closely linked. It happens rather regularly that concerns of gear changes happen on this + str (XXX) +. And even if the clutch is often the cause, sometimes we have surprises about the cause of the problems. In addition, this occasionally avoids having to change the entire kit. So here are the gearshift concerns the most regular.speed-pass-more-Toyota-Starlet

+ str (XXX) +: Impossible to pass one of the speeds

Sometimes one of the gears does not pass any more. Or just even or odd speeds. In this situation, the clutch is damaged. But this is not necessarily linked to the whole clutch kit or gearbox of your + str (XXX) +. It is possible that the malfunction comes from a link or a rubber which holds it. The malfunction can also come from the gearbox. You can drop it to verify that nothing foreign is blocking it. If it is damaged, it must be replaced.

Unable to shift gear once the + str (XXX) + engine is running

It is unfortunately a rather frequent dysfunction. Since the engine block is off, it is still possible to shift your gears, this means that the gearbox of the + str (XXX) + is in good condition. Once the engine block is running, it is impossible. The malfunction must come from the clutch. In general it will be necessary to change the entire clutch kit. You can always remove it and check the condition of all the parts. As a reminder, it is still recommended to change the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears work, the engine off or in working order, it's really annoying. The first thing to check is the wear and tear on the gearbox of your + str (XXX) +. The chances are that it will be out of service. To discern where the dysfunction comes from, it's relatively simple. If you can push the lever in the guide of a speed, but it does not engage, it is the clutch which certainly presents a malfunction. If the lever seems to be blocked and you cannot push it, the malfunction probably comes from the gearbox. For both, it is most certainly necessary to change one or more rooms.