Clutch and steering are two mechanical systems that the motorist controls. One, however, is used to wear out faster than the other: it is the clutch device of course. Of course with the gearbox, in close connection. It happens quite frequently that gearshift problems occur on this + str (XXX) +. And even if the clutch is regularly involved, sometimes we have surprises about the cause of the problems. In addition, this occasionally avoids having to change the entire kit. Here are the gear change issues the most usual.speed-pass-more-Toyota-Supra-Mkii

+ str (XXX) +: Impossible to pass one of the speeds

Sometimes one of the gears does not pass any more. Or only even or odd speeds. In this situation, the clutch is damaged. However, this is not inevitably linked to the entire clutch kit or gearbox of your + str (XXX) +. It is possible that the malfunction comes from a link or a rubber that holds it. The malfunction can also come from the gearbox. It can be disassembled to check that no external component is blocking it. If it is damaged, it must be replaced.

Unable to shift gear once the + str (XXX) + engine is running

It is unfortunately a rather recurrent dysfunction. Since the engine block is off, it is possible to shift your gears, this implies that the gearbox of your + str (XXX) + is in good condition. Once the engine block is running, it is impossible. The malfunction must come from the clutch. In general it will be necessary to replace the entire clutch kit. You can try to remove it and check the condition of all the components. For information, it is advisable to replace the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears pass, the engine stopped as lit, it's really unpleasant. The first thing to check is the state of the gearbox of your + str (XXX) +. There is a good chance that the latter is HS. In order to understand where the dysfunction came from it's relatively simple. If you can push the lever into the guide of a speed, but it does not engage, it is the clutch which probably has a malfunction. If the lever seems to be blocked and you cannot push it, the malfunction probably comes from the gearbox. In both cases, one or more parts will most likely need to be replaced.