Clutch and steering are the two mechanical systems that the driver controls. One has said that it tends to deteriorate faster than the other: it is the clutch system naturally. With in particular the gearbox, which is closely linked. Quite frequently, gearshift malfunctions occur on this + str (XXX) +. And even if the clutch is often the cause, it sometimes happens that we have surprises about the source of the malfunctions. In addition, it avoids from time to time to change the whole kit. Here are the gearshift malfunctions the most regular.
+ str (XXX) +: Impossible to pass one of the speeds
It sometimes happens that one of the gears no longer shifts. Or only even or odd speeds. In this situation, the clutch is worn. However, this is not necessarily due to the whole clutch kit or gearbox of your + str (XXX) +. The malfunction may come from a link or a rubber that holds it. The malfunction can still come from the gearbox. It can be placed to check that no foreign element is blocking it. If it is defective, you must replace it.
Unable to shift gear once the + str (XXX) + engine is running
Unfortunately, this is a fairly frequent malfunction. Since the engine is off it is possible to shift your gears, this implies that the gearbox of the + str (XXX) + is in good condition. Once the engine is running, it is impossible. The malfunction must come from the clutch. Often it will be essential to change the entire clutch kit. You can try to disassemble it and check the condition of all the parts. As a reminder, it is advisable to change the clutch every 150 km.
+ str (XXX) +: no speed passes
If none of the gears pass, the engine stopped or in working order, it's really annoying. The first thing to check is the wear and tear on the gearbox of your + str (XXX) +. There is a good chance that it will be HS. To understand where the malfunction comes from it's relatively easy. If you can push the lever into the guide of one of the gears, but it does not engage, it is the clutch which certainly presents a malfunction. If the lever seems to be stuck and you cannot push it, the malfunction is certainly due to the gearbox. For both, you most likely need to change one or more rooms.