The clutch and steering are the two mechanical devices that the driver controls. One, however, tends to deteriorate faster than the other: it is the clutch device of course. Obviously with the gearbox, which is closely linked. It happens quite regularly that concerns of gear changes occur on this + str (XXX) +. And even if the clutch is regularly involved, it happens that we have surprises about the reason for the concerns. Also, it avoids at times replacing the complete kit. So here are the gearshift concerns the most common.speed-pass-more-Toyota-Yaris-2

+ str (XXX) +: Impossible to pass one of the speeds

It often happens that one of the gears no longer shifts. Or only even or odd speeds. Therefore, the clutch is worn. However, this is not inevitably linked to the entire clutch kit or gearbox of your + str (XXX) +. It is possible that the malfunction comes from a link or a rubber that holds it. The malfunction can also come from the gearbox. It can be dismantled in order to check that no foreign component is blocking it. If the latter is damaged, it will have to be changed.

Unable to change gear once the + str (XXX) + engine is started

Unfortunately, this is a fairly common malfunction. Since the engine is off it is possible to shift your gears, it means that the gearbox of your + str (XXX) + is operational. Once the engine is started, it is impossible. The malfunction must come from the clutch. In general it will be essential to change the complete clutch kit. You can try to disassemble it and look at the condition of all the parts. For information, it is recommended to change the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears pass, the engine stopped as lit, it's really unpleasant. One thing to look at is the condition of the gearbox of your + str (XXX) +. There is a high probability that it will be HS. In order to discern where the malfunction comes from it's relatively easy. If you can push the lever in the guide of a speed, but that one does not engage, it is the clutch which probably has a malfunction. If the lever seems to be blocked and you cannot push it, the malfunction is probably due to the gearbox. For both, it will most likely be necessary to change one or more parts.