Clutch and steering are the two mechanical systems that the driver controls. One, however, wont deteriorate faster than the other: it is the clutch system of course. With in particular the gearbox, which is closely linked. It happens rather regularly that gearshift concerns arise on the + str (XXX) +. And even if the clutch is often the cause, it sometimes happens that we are surprised at the cause of the concerns. Also, this at times avoids replacing the complete kit. So these are the gearshift concerns The most common.
+ str (XXX) +: Impossible to pass one of the speeds
It sometimes happens that one of the gears no longer shifts. Or only even or odd speeds. As a result, the clutch is in poor condition. But this is not inevitably linked to the whole of the clutch kit or gearbox of your + str (XXX) +. Sometimes the problem comes from a link or a rubber that holds it. The problem can also come from the gearbox. It can be disassembled to check that no foreign element is blocking it. If the latter is damaged, you must replace it.
Unable to change gear once the + str (XXX) + engine is started
Unfortunately, this is a fairly recurring problem. Since the engine is off it is possible to shift your gears, this implies that the gearbox of the + str (XXX) + is operational. Once the engine is started, it is impossible. The problem comes from the clutch. Usually it will be essential to change the complete clutch kit. You can always remove it and check the condition of all the components. As a reminder, it is recommended to change the clutch every 150 km.
+ str (XXX) +: no speed passes
If none of the gears pass, the engine stopped as lit, it's really unpleasant. One thing to check is the condition of the gearbox of your + str (XXX) +. There is a good chance that it will be out of service. In order to understand where the problem comes from it is rather simple. If you can push the lever in the guide of one of the speeds, but the speed does not take, it is the clutch which certainly holds a problem. If the lever seems to be blocked and you cannot push it, the problem is probably caused by the gearbox. In both cases, you most certainly need to change one or more parts.