Clutch and steering are the two mechanical systems that the driver controls. One nevertheless tends to deteriorate faster than the other: it is the clutch system of course. Obviously with the gearbox, in close connection. It happens relatively regularly that gearshift concerns occur on this + str (XXX) +. And even if the clutch is regularly involved, it sometimes happens that we are surprised at the source of the problems. In addition, this sometimes avoids changing the entire kit. So here are the gearshift concerns The most common.speed pass-plus-Toyota Yaris-Verso

+ str (XXX) +: Impossible to pass one of the speeds

Sometimes one of the gears no longer shifts. Or only even or odd speeds. As a result, the clutch is in poor condition. However, this is not necessarily linked to the whole of the clutch kit or gearbox of your + str (XXX) +. Sometimes the problem comes from a link or a rubber that holds it. The problem can also come from the gearbox. It can be disassembled to verify that no foreign element is blocking it. If it is damaged, it must be changed.

Unable to shift gear once the + str (XXX) + engine is running

Unfortunately, this is a fairly common problem. Since the engine block is off it is possible to shift your gears, this means that the + str (XXX) + gearbox is operational. Once the engine block is on, it is impossible. The problem comes from the clutch. Usually it will be advisable to replace the entire clutch kit. You can try to remove it and look at the condition of all the parts. As a reminder, it is recommended to replace the clutch every 150 km.

+ str (XXX) +: no speed passes

If none of the gears work, the engine off or in working order, it's really annoying. One thing to look at is the condition of the gearbox of your + str (XXX) +. There may be a good chance that it will be out of service. In order to discern where the problem comes from, it's rather simple. If you can push the lever into the guide of one of the gears, but the gear does not take, the clutch is probably the problem. If the lever seems to be stuck and you can't push it, the problem is probably the gearbox. For both, it will most certainly replace one or more parts.